本文将详细介绍Linux下Apache、php3、MySQL的整合的相关问题的解决方法，需要的朋友可以参考下

apache的版本：
httpd-2.2.21-win32-x86-no_ssl
php的版本：
php-5[1].3.8-Win32-VC9-x86
(一) 准备工作
1.先找在D:/amp/php中找到php.ini-development这个文件，然后把它改成php.ini这个文件名
2.用记事本，或editplus将其打开
(二）操作步骤:
1.告诉php所用的扩展模块所在位置
807行 extension_dir = "D:/amp/php/ext" 点我查看
2. 告诉php所用的时区 998行 点我查看代码
date.timezone = PRC
3.让apache引入php解释引擎 点我查看
4. 如果要用php中引入相应模块 点我查看
注意当在PHP中引入extension=php_curl.dll这个模块时apache2.2就会提示找到相应模块。如下图
 
这时在apache2.2的配置文件pttd.conf中加入： 点我查看
LoadFile "D:/amp/php/libeay32.dll"
LoadFile "D:/amp/php/ssleay32.dll"
5.如果整合PHP后,apache不能启动,且测试配置文件的结果类似于下图
 
这是因为系统上没有相应的vc编译器的库文件和头文件.安装相应的库文件即可.以vc9为例, 安装 vcredist_x86.exe,即可解决
以下是在apache2.2中的操作
1）:加载php模块
例:在loadModule 语句下面,添加一行
LoadModule php5_module "D:/amp/php/php5apache2_2.dll"
2）:通过声明,让apache能够识别.php程序
在Addtyp 系列行附近,添加一行
AddType application/x-httpd-php .php
3）:声明php.ini配置文件的位置,使apache能够读取php运行的相关参数.
在apache的主记录行里(非<if Module>这样的配置段),添加一行
PHPIniDir "D:/amp/php"
4）: 重启apache 测试效果.
代码展示：

 
[PHP] 

; About php.ini ; 

; PHP's initialization file, generally called php.ini, is responsible for 
; configuring many of the aspects of PHP's behavior. 
; PHP attempts to find and load this configuration from a number of locations. 
; The following is a summary of its search order: 
; 1. SAPI module specific location. 
; 2. The PHPRC environment variable. (As of PHP 5.2.0) 
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) 
; 4. Current working directory (except CLI) 
; 5. The web server's directory (for SAPI modules), or directory of PHP 
; (otherwise in Windows) 
; 6. The directory from the --with-config-file-path compile time option, or the 
; Windows directory (C:\windows or C:\winnt) 
; See the PHP docs for more specific information. 
; http://php.net/configuration.file 
; The syntax of the file is extremely simple. Whitespace and Lines 
; beginning with a semicolon are silently ignored (as you probably guessed). 
; Section headers (e.g. [Foo]) are also silently ignored, even though 
; they might mean something in the future. 
; Directives following the section heading [PATH=/www/mysite] only 
; apply to PHP files in the /www/mysite directory. Directives 
; following the section heading [HOST=www.example.com] only apply to 
; PHP files served from www.example.com. Directives set in these 
; special sections cannot be overridden by user-defined INI files or 
; at runtime. Currently, [PATH=] and [HOST=] sections only work under 
; CGI/FastCGI. 
; http://php.net/ini.sections 
; Directives are specified using the following syntax: 
; directive = value 
; Directive names are *case sensitive* - foo=bar is different from FOO=bar. 
; Directives are variables used to configure PHP or PHP extensions. 
; There is no name validation. If PHP can't find an expected 
; directive because it is not set or is mistyped, a default value will be used. 
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one 
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression 
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a 
; previously set variable or directive (e.g. ${foo}) 
; Expressions in the INI file are limited to bitwise operators and parentheses: 
; | bitwise OR 
; ^ bitwise XOR 
; & bitwise AND 
; ~ bitwise NOT 
; ! boolean NOT 
; Boolean flags can be turned on using the values 1, On, True or Yes. 
; They can be turned off using the values 0, Off, False or No. 
; An empty string can be denoted by simply not writing anything after the equal 
; sign, or by using the None keyword: 
; foo = ; sets foo to an empty string 
; foo = None ; sets foo to an empty string 
; foo = "None" ; sets foo to the string 'None' 
; If you use constants in your value, and these constants belong to a 
; dynamically loaded extension (either a PHP extension or a Zend extension), 
; you may only use these constants *after* the line that loads the extension. 

; About this file ; 

; PHP comes packaged with two INI files. One that is recommended to be used 
; in production environments and one that is recommended to be used in 
; development environments. 
; php.ini-production contains settings which hold security, performance and 
; best practices at its core. But please be aware, these settings may break 
; compatibility with older or less security conscience applications. We 
; recommending using the production ini in production and testing environments. 
; php.ini-development is very similar to its production variant, except it's 
; much more verbose when it comes to errors. We recommending using the 
; development version only in development environments as errors shown to 
; application users can inadvertently leak otherwise secure information. 

; Quick Reference ; 

; The following are all the settings which are different in either the production 
; or development versions of the INIs with respect to PHP's default behavior. 
; Please see the actual settings later in the document for more details as to why 
; we recommend these changes in PHP's behavior. 
; allow_call_time_pass_reference 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; display_errors 
; Default Value: On 
; Development Value: On 
; Production Value: Off 
; display_startup_errors 
; Default Value: Off 
; Development Value: On 
; Production Value: Off 
; error_reporting 
; Default Value: E_ALL & ~E_NOTICE 
; Development Value: E_ALL | E_STRICT 
; Production Value: E_ALL & ~E_DEPRECATED 
; html_errors 
; Default Value: On 
; Development Value: On 
; Production value: Off 
; log_errors 
; Default Value: Off 
; Development Value: On 
; Production Value: On 
; magic_quotes_gpc 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; max_input_time 
; Default Value: -1 (Unlimited) 
; Development Value: 60 (60 seconds) 
; Production Value: 60 (60 seconds) 
; output_buffering 
; Default Value: Off 
; Development Value: 4096 
; Production Value: 4096 
; register_argc_argv 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; register_long_arrays 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; request_order 
; Default Value: None 
; Development Value: "GP" 
; Production Value: "GP" 
; session.bug_compat_42 
; Default Value: On 
; Development Value: On 
; Production Value: Off 
; session.bug_compat_warn 
; Default Value: On 
; Development Value: On 
; Production Value: Off 
; session.gc_divisor 
; Default Value: 100 
; Development Value: 1000 
; Production Value: 1000 
; session.hash_bits_per_character 
; Default Value: 4 
; Development Value: 5 
; Production Value: 5 
; short_open_tag 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; track_errors 
; Default Value: Off 
; Development Value: On 
; Production Value: Off 
; url_rewriter.tags 
; Default Value: "a=href,area=href,frame=src,form=,fieldset=" 
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 
; variables_order 
; Default Value: "EGPCS" 
; Development Value: "GPCS" 
; Production Value: "GPCS" 

; php.ini Options ; 

; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" 
;user_ini.filename = ".user.ini" 
; To disable this feature set this option to empty value 
;user_ini.filename = 
; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) 
;user_ini.cache_ttl = 300 

; Language Options ; 

; Enable the PHP scripting language engine under Apache. 
; http://php.net/engine 
engine = On 
; This directive determines whether or not PHP will recognize code between 
; <? and ?> tags as PHP source which should be processed as such. It's been 
; recommended for several years that you not use the short tag "short cut" and 
; instead to use the full <?php and ?> tag combination. With the wide spread use 
; of XML and use of these tags by other languages, the server can become easily 
; confused and end up parsing the wrong code in the wrong context. But because 
; this short cut has been a feature for such a long time, it's currently still 
; supported for backwards compatibility, but we recommend you don't use them. 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; http://php.net/short-open-tag 
short_open_tag = Off 
; Allow ASP-style <% %> tags. 
; http://php.net/asp-tags 
asp_tags = Off 
; The number of significant digits displayed in floating point numbers. 
; http://php.net/precision 
precision = 14 
; Enforce year 2000 compliance (will cause problems with non-compliant browsers) 
; http://php.net/y2k-compliance 
y2k_compliance = On 
; Output buffering is a mechanism for controlling how much output data 
; (excluding headers and cookies) PHP should keep internally before pushing that 
; data to the client. If your application's output exceeds this setting, PHP 
; will send that data in chunks of roughly the size you specify. 
; Turning on this setting and managing its maximum buffer size can yield some 
; interesting side-effects depending on your application and web server. 
; You may be able to send headers and cookies after you've already sent output 
; through print or echo. You also may see performance benefits if your server is 
; emitting less packets due to buffered output versus PHP streaming the output 
; as it gets it. On production servers, 4096 bytes is a good setting for performance 
; reasons. 
; Note: Output buffering can also be controlled via Output Buffering Control 
; functions. 
; Possible Values: 
; On = Enabled and buffer is unlimited. (Use with caution) 
; Off = Disabled 
; Integer = Enables the buffer and sets its maximum size in bytes. 
; Note: This directive is hardcoded to Off for the CLI SAPI 
; Default Value: Off 
; Development Value: 4096 
; Production Value: 4096 
; http://php.net/output-buffering 
output_buffering = 4096 
; You can redirect all of the output of your scripts to a function. For 
; example, if you set output_handler to "mb_output_handler", character 
; encoding will be transparently converted to the specified encoding. 
; Setting any output handler automatically turns on output buffering. 
; Note: People who wrote portable scripts should not depend on this ini 
; directive. Instead, explicitly set the output handler using ob_start(). 
; Using this ini directive may cause problems unless you know what script 
; is doing. 
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" 
; and you cannot use both "ob_gzhandler" and "zlib.output_compression". 
; Note: output_handler must be empty if this is set 'On' !!!! 
; Instead you must use zlib.output_handler. 
; http://php.net/output-handler 
;output_handler = 
; Transparent output compression using the zlib library 
; Valid values for this option are 'off', 'on', or a specific buffer size 
; to be used for compression (default is 4KB) 
; Note: Resulting chunk size may vary due to nature of compression. PHP 
; outputs chunks that are few hundreds bytes each as a result of 
; compression. If you prefer a larger chunk size for better 
; performance, enable output_buffering in addition. 
; Note: You need to use zlib.output_handler instead of the standard 
; output_handler, or otherwise the output will be corrupted. 
; http://php.net/zlib.output-compression 
zlib.output_compression = Off 
; http://php.net/zlib.output-compression-level 
;zlib.output_compression_level = -1 
; You cannot specify additional output handlers if zlib.output_compression 
; is activated here. This setting does the same as output_handler but in 
; a different order. 
; http://php.net/zlib.output-handler 
;zlib.output_handler = 
; Implicit flush tells PHP to tell the output layer to flush itself 
; automatically after every output block. This is equivalent to calling the 
; PHP function flush() after each and every call to print() or echo() and each 
; and every HTML block. Turning this option on has serious performance 
; implications and is generally recommended for debugging purposes only. 
; http://php.net/implicit-flush 
; Note: This directive is hardcoded to On for the CLI SAPI 
implicit_flush = Off 
; The unserialize callback function will be called (with the undefined class' 
; name as parameter), if the unserializer finds an undefined class 
; which should be instantiated. A warning appears if the specified function is 
; not defined, or if the function doesn't include/implement the missing class. 
; So only set this entry, if you really want to implement such a 
; callback-function. 
unserialize_callback_func = 
; When floats & doubles are serialized store serialize_precision significant 
; digits after the floating point. The default value ensures that when floats 
; are decoded with unserialize, the data will remain the same. 
serialize_precision = 17 
; This directive allows you to enable and disable warnings which PHP will issue 
; if you pass a value by reference at function call time. Passing values by 
; reference at function call time is a deprecated feature which will be removed 
; from PHP at some point in the near future. The acceptable method for passing a 
; value by reference to a function is by declaring the reference in the functions 
; definition, not at call time. This directive does not disable this feature, it 
; only determines whether PHP will warn you about it or not. These warnings 
; should enabled in development environments only. 
; Default Value: On (Suppress warnings) 
; Development Value: Off (Issue warnings) 
; Production Value: Off (Issue warnings) 
; http://php.net/allow-call-time-pass-reference 
allow_call_time_pass_reference = Off 
; Safe Mode 
; http://php.net/safe-mode 
safe_mode = Off 
; By default, Safe Mode does a UID compare check when 
; opening files. If you want to relax this to a GID compare, 
; then turn on safe_mode_gid. 
; http://php.net/safe-mode-gid 
safe_mode_gid = Off 
; When safe_mode is on, UID/GID checks are bypassed when 
; including files from this directory and its subdirectories. 
; (directory must also be in include_path or full path must 
; be used when including) 
; http://php.net/safe-mode-include-dir 
safe_mode_include_dir = 
; When safe_mode is on, only executables located in the safe_mode_exec_dir 
; will be allowed to be executed via the exec family of functions. 
; http://php.net/safe-mode-exec-dir 
safe_mode_exec_dir = 
; Setting certain environment variables may be a potential security breach. 
; This directive contains a comma-delimited list of prefixes. In Safe Mode, 
; the user may only alter environment variables whose names begin with the 
; prefixes supplied here. By default, users will only be able to set 
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). 
; Note: If this directive is empty, PHP will let the user modify ANY 
; environment variable! 
; http://php.net/safe-mode-allowed-env-vars 
safe_mode_allowed_env_vars = PHP_ 
; This directive contains a comma-delimited list of environment variables that 
; the end user won't be able to change using putenv(). These variables will be 
; protected even if safe_mode_allowed_env_vars is set to allow to change them. 
; http://php.net/safe-mode-protected-env-vars 
safe_mode_protected_env_vars = LD_LIBRARY_PATH 
; open_basedir, if set, limits all file operations to the defined directory 
; and below. This directive makes most sense if used in a per-directory 
; or per-virtualhost web server configuration file. This directive is 
; *NOT* affected by whether Safe Mode is turned On or Off. 
; http://php.net/open-basedir 
;open_basedir = 
; This directive allows you to disable certain functions for security reasons. 
; It receives a comma-delimited list of function names. This directive is 
; *NOT* affected by whether Safe Mode is turned On or Off. 
; http://php.net/disable-functions 
disable_functions = 
; This directive allows you to disable certain classes for security reasons. 
; It receives a comma-delimited list of class names. This directive is 
; *NOT* affected by whether Safe Mode is turned On or Off. 
; http://php.net/disable-classes 
disable_classes = 
; Colors for Syntax Highlighting mode. Anything that's acceptable in 
; <span style="color: ???????"> would work. 
; http://php.net/syntax-highlighting 
;highlight.string = #DD0000 
;highlight.comment = #FF9900 
;highlight.keyword = #007700 
;highlight.bg = #FFFFFF 
;highlight.default = #0000BB 
;highlight.html = #000000 
; If enabled, the request will be allowed to complete even if the user aborts 
; the request. Consider enabling it if executing long requests, which may end up 
; being interrupted by the user or a browser timing out. PHP's default behavior 
; is to disable this feature. 
; http://php.net/ignore-user-abort 
;ignore_user_abort = On 
; Determines the size of the realpath cache to be used by PHP. This value should 
; be increased on systems where PHP opens many files to reflect the quantity of 
; the file operations performed. 
; http://php.net/realpath-cache-size 
;realpath_cache_size = 16k 
; Duration of time, in seconds for which to cache realpath information for a given 
; file or directory. For systems with rarely changing files, consider increasing this 
; value. 
; http://php.net/realpath-cache-ttl 
;realpath_cache_ttl = 120 

; Miscellaneous ; 

; Decides whether PHP may expose the fact that it is installed on the server 
; (e.g. by adding its signature to the Web server header). It is no security 
; threat in any way, but it makes it possible to determine whether you use PHP 
; on your server or not. 
; http://php.net/expose-php 
expose_php = On 

; Resource Limits ; 

; Maximum execution time of each script, in seconds 
; http://php.net/max-execution-time 
; Note: This directive is hardcoded to 0 for the CLI SAPI 
max_execution_time = 30 
; Maximum amount of time each script may spend parsing request data. It's a good 
; idea to limit this time on productions servers in order to eliminate unexpectedly 
; long running scripts. 
; Note: This directive is hardcoded to -1 for the CLI SAPI 
; Default Value: -1 (Unlimited) 
; Development Value: 60 (60 seconds) 
; Production Value: 60 (60 seconds) 
; http://php.net/max-input-time 
max_input_time = 60 
; Maximum input variable nesting level 
; http://php.net/max-input-nesting-level 
;max_input_nesting_level = 64 
; Maximum amount of memory a script may consume (128MB) 
; http://php.net/memory-limit 
memory_limit = 128M 

; Error handling and logging ; 

; This directive informs PHP of which errors, warnings and notices you would like 
; it to take action for. The recommended way of setting values for this 
; directive is through the use of the error level constants and bitwise 
; operators. The error level constants are below here for convenience as well as 
; some common settings and their meanings. 
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT 
; those related to E_NOTICE and E_STRICT, which together cover best practices and 
; recommended coding standards in PHP. For performance reasons, this is the 
; recommend error reporting setting. Your production server shouldn't be wasting 
; resources complaining about best practices and coding standards. That's what 
; development servers and development settings are for. 
; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This 
; means it pretty much reports everything which is exactly what you want during 
; development and early testing. 

; Error Level Constants: 
; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0) 
; E_ERROR - fatal run-time errors 
; E_RECOVERABLE_ERROR - almost fatal run-time errors 
; E_WARNING - run-time warnings (non-fatal errors) 
; E_PARSE - compile-time parse errors 
; E_NOTICE - run-time notices (these are warnings which often result 
; from a bug in your code, but it's possible that it was 
; intentional (e.g., using an uninitialized variable and 
; relying on the fact it's automatically initialized to an 
; empty string) 
; E_STRICT - run-time notices, enable to have PHP suggest changes 
; to your code which will ensure the best interoperability 
; and forward compatibility of your code 
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup 
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's 
; initial startup 
; E_COMPILE_ERROR - fatal compile-time errors 
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) 
; E_USER_ERROR - user-generated error message 
; E_USER_WARNING - user-generated warning message 
; E_USER_NOTICE - user-generated notice message 
; E_DEPRECATED - warn about code that will not work in future versions 
; of PHP 
; E_USER_DEPRECATED - user-generated deprecation warnings 

; Common Values: 
; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) 
; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) 
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) 
; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) 
; Default Value: E_ALL & ~E_NOTICE 
; Development Value: E_ALL | E_STRICT 
; Production Value: E_ALL & ~E_DEPRECATED 
; http://php.net/error-reporting 
error_reporting = E_ALL | E_STRICT 
; This directive controls whether or not and where PHP will output errors, 
; notices and warnings too. Error output is very useful during development, but 
; it could be very dangerous in production environments. Depending on the code 
; which is triggering the error, sensitive information could potentially leak 
; out of your application such as database usernames and passwords or worse. 
; It's recommended that errors be logged on production servers rather than 
; having the errors sent to STDOUT. 
; Possible Values: 
; Off = Do not display any errors 
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) 
; On or stdout = Display errors to STDOUT 
; Default Value: On 
; Development Value: On 
; Production Value: Off 
; http://php.net/display-errors 
display_errors = On 
; The display of errors which occur during PHP's startup sequence are handled 
; separately from display_errors. PHP's default behavior is to suppress those 
; errors from clients. Turning the display of startup errors on can be useful in 
; debugging configuration problems. But, it's strongly recommended that you 
; leave this setting off on production servers. 
; Default Value: Off 
; Development Value: On 
; Production Value: Off 
; http://php.net/display-startup-errors 
display_startup_errors = On 
; Besides displaying errors, PHP can also log errors to locations such as a 
; server-specific log, STDERR, or a location specified by the error_log 
; directive found below. While errors should not be displayed on productions 
; servers they should still be monitored and logging is a great way to do that. 
; Default Value: Off 
; Development Value: On 
; Production Value: On 
; http://php.net/log-errors 
log_errors = On 
; Set maximum length of log_errors. In error_log information about the source is 
; added. The default is 1024 and 0 allows to not apply any maximum length at all. 
; http://php.net/log-errors-max-len 
log_errors_max_len = 1024 
; Do not log repeated messages. Repeated errors must occur in same file on same 
; line unless ignore_repeated_source is set true. 
; http://php.net/ignore-repeated-errors 
ignore_repeated_errors = Off 
; Ignore source of message when ignoring repeated messages. When this setting 
; is On you will not log errors with repeated messages from different files or 
; source lines. 
; http://php.net/ignore-repeated-source 
ignore_repeated_source = Off 
; If this parameter is set to Off, then memory leaks will not be shown (on 
; stdout or in the log). This has only effect in a debug compile, and if 
; error reporting includes E_WARNING in the allowed list 
; http://php.net/report-memleaks 
report_memleaks = On 
; This setting is on by default. 
;report_zend_debug = 0 
; Store the last error/warning message in $php_errormsg (boolean). Setting this value 
; to On can assist in debugging and is appropriate for development servers. It should 
; however be disabled on production servers. 
; Default Value: Off 
; Development Value: On 
; Production Value: Off 
; http://php.net/track-errors 
track_errors = On 
; Turn off normal error reporting and emit XML-RPC error XML 
; http://php.net/xmlrpc-errors 
;xmlrpc_errors = 0 
; An XML-RPC faultCode 
;xmlrpc_error_number = 0 
; When PHP displays or logs an error, it has the capability of inserting html 
; links to documentation related to that error. This directive controls whether 
; those HTML links appear in error messages or not. For performance and security 
; reasons, it's recommended you disable this on production servers. 
; Note: This directive is hardcoded to Off for the CLI SAPI 
; Default Value: On 
; Development Value: On 
; Production value: Off 
; http://php.net/html-errors 
html_errors = On 
; If html_errors is set On PHP produces clickable error messages that direct 
; to a page describing the error or function causing the error in detail. 
; You can download a copy of the PHP manual from http://php.net/docs 
; and change docref_root to the base URL of your local copy including the 
; leading '/'. You must also specify the file extension being used including 
; the dot. PHP's default behavior is to leave these settings empty. 
; Note: Never use this feature for production boxes. 
; http://php.net/docref-root 
; Examples 
;docref_root = "/phpmanual/" 
; http://php.net/docref-ext 
;docref_ext = .html 
; String to output before an error message. PHP's default behavior is to leave 
; this setting blank. 
; http://php.net/error-prepend-string 
; Example: 
;error_prepend_string = "<span style='color: #ff0000'>" 
; String to output after an error message. PHP's default behavior is to leave 
; this setting blank. 
; http://php.net/error-append-string 
; Example: 
;error_append_string = "</span>" 
; Log errors to specified file. PHP's default behavior is to leave this value 
; empty. 
; http://php.net/error-log 
; Example: 
;error_log = php_errors.log 
; Log errors to syslog (Event Log on NT, not valid in Windows 95). 
;error_log = syslog 

; Data Handling ; 

; The separator used in PHP generated URLs to separate arguments. 
; PHP's default setting is "&". 
; http://php.net/arg-separator.output 
; Example: 
;arg_separator.output = "&" 
; List of separator(s) used by PHP to parse input URLs into variables. 
; PHP's default setting is "&". 
; NOTE: Every character in this directive is considered as separator! 
; http://php.net/arg-separator.input 
; Example: 
;arg_separator.input = ";&" 
; This directive determines which super global arrays are registered when PHP 
; starts up. If the register_globals directive is enabled, it also determines 
; what order variables are populated into the global space. G,P,C,E & S are 
; abbreviations for the following respective super globals: GET, POST, COOKIE, 
; ENV and SERVER. There is a performance penalty paid for the registration of 
; these arrays and because ENV is not as commonly used as the others, ENV is 
; is not recommended on productions servers. You can still get access to 
; the environment variables through getenv() should you need to. 
; Default Value: "EGPCS" 
; Development Value: "GPCS" 
; Production Value: "GPCS"; 
; http://php.net/variables-order 
variables_order = "GPCS" 
; This directive determines which super global data (G,P,C,E & S) should 
; be registered into the super global array REQUEST. If so, it also determines 
; the order in which that data is registered. The values for this directive are 
; specified in the same manner as the variables_order directive, EXCEPT one. 
; Leaving this value empty will cause PHP to use the value set in the 
; variables_order directive. It does not mean it will leave the super globals 
; array REQUEST empty. 
; Default Value: None 
; Development Value: "GP" 
; Production Value: "GP" 
; http://php.net/request-order 
request_order = "GP" 
; Whether or not to register the EGPCS variables as global variables. You may 
; want to turn this off if you don't want to clutter your scripts' global scope 
; with user data. 
; You should do your best to write your scripts so that they do not require 
; register_globals to be on; Using form variables as globals can easily lead 
; to possible security problems, if the code is not very well thought of. 
; http://php.net/register-globals 
register_globals = Off 
; Determines whether the deprecated long $HTTP_*_VARS type predefined variables 
; are registered by PHP or not. As they are deprecated, we obviously don't 
; recommend you use them. They are on by default for compatibility reasons but 
; they are not recommended on production servers. 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; http://php.net/register-long-arrays 
register_long_arrays = Off 
; This directive determines whether PHP registers $argv & $argc each time it 
; runs. $argv contains an array of all the arguments passed to PHP when a script 
; is invoked. $argc contains an integer representing the number of arguments 
; that were passed when the script was invoked. These arrays are extremely 
; useful when running scripts from the command line. When this directive is 
; enabled, registering these variables consumes CPU cycles and memory each time 
; a script is executed. For performance reasons, this feature should be disabled 
; on production servers. 
; Note: This directive is hardcoded to On for the CLI SAPI 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; http://php.net/register-argc-argv 
register_argc_argv = Off 
; When enabled, the SERVER and ENV variables are created when they're first 
; used (Just In Time) instead of when the script starts. If these variables 
; are not used within a script, having this directive on will result in a 
; performance gain. The PHP directives register_globals, register_long_arrays, 
; and register_argc_argv must be disabled for this directive to have any affect. 
; http://php.net/auto-globals-jit 
auto_globals_jit = On 
; Maximum size of POST data that PHP will accept. 
; http://php.net/post-max-size 
post_max_size = 8M 
; Magic quotes are a preprocessing feature of PHP where PHP will attempt to 
; escape any character sequences in GET, POST, COOKIE and ENV data which might 
; otherwise corrupt data being placed in resources such as databases before 
; making that data available to you. Because of character encoding issues and 
; non-standard SQL implementations across many databases, it's not currently 
; possible for this feature to be 100% accurate. PHP's default behavior is to 
; enable the feature. We strongly recommend you use the escaping mechanisms 
; designed specifically for the database your using instead of relying on this 
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is 
; scheduled for removal in PHP 6. 
; Default Value: On 
; Development Value: Off 
; Production Value: Off 
; http://php.net/magic-quotes-gpc 
magic_quotes_gpc = Off 
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. 
; http://php.net/magic-quotes-runtime 
magic_quotes_runtime = Off 
; Use Sybase-style magic quotes (escape ' with '' instead of \'). 
; http://php.net/magic-quotes-sybase 
magic_quotes_sybase = Off 
; Automatically add files before PHP document. 
; http://php.net/auto-prepend-file 
auto_prepend_file = 
; Automatically add files after PHP document. 
; http://php.net/auto-append-file 
auto_append_file = 
; By default, PHP will output a character encoding using 
; the Content-type: header. To disable sending of the charset, simply 
; set it to be empty. 

; PHP's built-in default is text/html 
; http://php.net/default-mimetype 
default_mimetype = "text/html" 
; PHP's default character set is set to empty. 
; http://php.net/default-charset 
;default_charset = "iso-8859-1" 
; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is 
; to disable this feature. 
; http://php.net/always-populate-raw-post-data 
;always_populate_raw_post_data = On 

; Paths and Directories ; 

; UNIX: "/path1:/path2" 
;include_path = ".:/php/includes" 

; Windows: "\path1;\path2" 
;include_path = ".;c:\php\includes" 

; PHP's default setting for include_path is ".;/path/to/php/pear" 
; http://php.net/include-path 
; The root of the PHP pages, used only if nonempty. 
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root 
; if you are running php as a CGI under any web server (other than IIS) 
; see documentation for security issues. The alternate is to use the 
; cgi.force_redirect configuration below 
; http://php.net/doc-root 
doc_root = 
; The directory under which PHP opens the script using /~username used only 
; if nonempty. 
; http://php.net/user-dir 
user_dir = 
; Directory in which the loadable extensions (modules) reside. 
; http://php.net/extension-dir 
;extension_dir = "./" 
; On windows: 
;下面这句告诉php扩展模块的所在位置 点我返回 
extension_dir = "D:/amp/php/ext" 
; Whether or not to enable the dl() function. The dl() function does NOT work 
; properly in multithreaded servers, such as IIS or Zeus, and is automatically 
; disabled on them. 
; http://php.net/enable-dl 
enable_dl = Off 
; cgi.force_redirect is necessary to provide security running PHP as a CGI under 
; most web servers. Left undefined, PHP turns this on by default. You can 
; turn it off here AT YOUR OWN RISK 
; **You CAN safely turn this off for IIS, in fact, you MUST.** 
; http://php.net/cgi.force-redirect 
;cgi.force_redirect = 1 
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with 
; every request. PHP's default behavior is to disable this feature. 
;cgi.nph = 1 
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP 
; will look for to know it is OK to continue execution. Setting this variable MAY 
; cause security issues, KNOW WHAT YOU ARE DOING FIRST. 
; http://php.net/cgi.redirect-status-env 
;cgi.redirect_status_env = ; 
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's 
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok 
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting 
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting 
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts 
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. 
; http://php.net/cgi.fix-pathinfo 
;cgi.fix_pathinfo=1 
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate 
; security tokens of the calling client. This allows IIS to define the 
; security context that the request runs under. mod_fastcgi under Apache 
; does not currently support this feature (03/17/2002) 
; Set to 1 if running under IIS. Default is zero. 
; http://php.net/fastcgi.impersonate 
;fastcgi.impersonate = 1; 
; Disable logging through FastCGI connection. PHP's default behavior is to enable 
; this feature. 
;fastcgi.logging = 0 
; cgi.rfc2616_headers configuration option tells PHP what type of headers to 
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that 
; is supported by Apache. When this option is set to 1 PHP will send 
; RFC2616 compliant header. 
; Default is zero. 
; http://php.net/cgi.rfc2616-headers 
;cgi.rfc2616_headers = 0 

; File Uploads ; 

; Whether to allow HTTP file uploads. 
; http://php.net/file-uploads 
file_uploads = On 
; Temporary directory for HTTP uploaded files (will use system default if not 
; specified). 
; http://php.net/upload-tmp-dir 
;upload_tmp_dir = 
; Maximum allowed size for uploaded files. 
; http://php.net/upload-max-filesize 
upload_max_filesize = 2M 
; Maximum number of files that can be uploaded via a single request 
max_file_uploads = 20 

; Fopen wrappers ; 

; Whether to allow the treatment of URLs (like http:// or ftp://) as files. 
; http://php.net/allow-url-fopen 
allow_url_fopen = On 
; Whether to allow include/require to open URLs (like http:// or ftp://) as files. 
; http://php.net/allow-url-include 
allow_url_include = Off 
; Define the anonymous ftp password (your email address). PHP's default setting 
; for this is empty. 
; http://php.net/from 
;from="[email protected]" 
; Define the User-Agent string. PHP's default setting for this is empty. 
; http://php.net/user-agent 
;user_agent="PHP" 
; Default timeout for socket based streams (seconds) 
; http://php.net/default-socket-timeout 
default_socket_timeout = 60 
; If your scripts have to deal with files from Macintosh systems, 
; or you are running on a Mac and need to deal with files from 
; unix or win32 systems, setting this flag will cause PHP to 
; automatically detect the EOL character in those files so that 
; fgets() and file() will work regardless of the source of the file. 
; http://php.net/auto-detect-line-endings 
;auto_detect_line_endings = Off 

; Dynamic Extensions ; 

; If you wish to have an extension loaded automatically, use the following 
; syntax: 

; extension=modulename.extension 

; For example, on Windows: 

; extension=msql.dll 

; ... or under UNIX: 

; extension=msql.so 

; ... or with a path: 

; extension=/path/to/extension/msql.so 

; If you only provide the name of the extension, PHP will look for it in its 
; default extension directory. 

; Windows Extensions 
; Note that ODBC support is built in, so no dll is needed for it. 
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) 
; extension folders as well as the separate PECL DLL download (PHP 5). 
; Be sure to appropriately set the extension_dir directive. 

;extension=php_bz2.dll 
extension=php_curl.dll ;引入这个模块时，apache2.2会报错，找不到相应模块 
;extension=php_fileinfo.dll 
extension=php_gd2.dll ;引入画图模块 
;extension=php_gettext.dll 
;extension=php_gmp.dll 
;extension=php_intl.dll 
;extension=php_imap.dll 
;extension=php_interbase.dll 
;extension=php_ldap.dll 
;extension=php_mbstring.dll 
;extension=php_exif.dll ; Must be after mbstring as it depends on it 
extension=php_mysql.dll ;引入mysql模块 
extension=php_mysqli.dll ;引入mysql模块 
;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client 
;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client 
;extension=php_openssl.dll 
;extension=php_pdo_firebird.dll 
;extension=php_pdo_mssql.dll 
;extension=php_pdo_mysql.dll 
;extension=php_pdo_oci.dll 
;extension=php_pdo_odbc.dll 
;extension=php_pdo_pgsql.dll 
;extension=php_pdo_sqlite.dll 
;extension=php_pgsql.dll 
;extension=php_phar.dll 
;extension=php_pspell.dll 
;extension=php_shmop.dll 
; The MIBS data available in the PHP distribution must be installed. 
; See http://www.php.net/manual/en/snmp.installation.php 
;extension=php_snmp.dll 
;extension=php_soap.dll 
;extension=php_sockets.dll 
;extension=php_sqlite.dll 
;extension=php_sqlite3.dll 
;extension=php_sybase_ct.dll 
;extension=php_tidy.dll 
;extension=php_xmlrpc.dll 
;extension=php_xsl.dll 
;extension=php_zip.dll 

; Module Settings ; 

[Date] 
; Defines the default timezone used by the date functions 
; http://php.net/date.timezone 点我返回 
date.timezone = PRC 
; http://php.net/date.default-latitude 
;date.default_latitude = 31.7667 
; http://php.net/date.default-longitude 
;date.default_longitude = 35.2333 
; http://php.net/date.sunrise-zenith 
;date.sunrise_zenith = 90.583333 
; http://php.net/date.sunset-zenith 
;date.sunset_zenith = 90.583333 
[filter] 
; http://php.net/filter.default 
;filter.default = unsafe_raw 
; http://php.net/filter.default-flags 
;filter.default_flags = 
[iconv] 
;iconv.input_encoding = ISO-8859-1 
;iconv.internal_encoding = ISO-8859-1 
;iconv.output_encoding = ISO-8859-1 
[intl] 
;intl.default_locale = 
; This directive allows you to produce PHP errors when some error 
; happens within intl functions. The value is the level of the error produced. 
; Default is 0, which does not produce any errors. 
;intl.error_level = E_WARNING 
[sqlite] 
; http://php.net/sqlite.assoc-case 
;sqlite.assoc_case = 0 
[sqlite3] 
;sqlite3.extension_dir = 
[Pcre] 
;PCRE library backtracking limit. 
; http://php.net/pcre.backtrack-limit 
;pcre.backtrack_limit=100000 
;PCRE library recursion limit. 
;Please note that if you set this value to a high number you may consume all 
;the available process stack and eventually crash PHP (due to reaching the 
;stack size limit imposed by the Operating System). 
; http://php.net/pcre.recursion-limit 
;pcre.recursion_limit=100000 
[Pdo] 
; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" 
; http://php.net/pdo-odbc.connection-pooling 
;pdo_odbc.connection_pooling=strict 
;pdo_odbc.db2_instance_name 
[Pdo_mysql] 
; If mysqlnd is used: Number of cache slots for the internal result set cache 
; http://php.net/pdo_mysql.cache_size 
pdo_mysql.cache_size = 2000 
; Default socket name for local MySQL connects. If empty, uses the built-in 
; MySQL defaults. 
; http://php.net/pdo_mysql.default-socket 
pdo_mysql.default_socket= 
[Phar] 
; http://php.net/phar.readonly 
;phar.readonly = On 
; http://php.net/phar.require-hash 
;phar.require_hash = On 
;phar.cache_list = 
[Syslog] 
; Whether or not to define the various syslog variables (e.g. $LOG_PID, 
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In 
; runtime, you can define these variables by calling define_syslog_variables(). 
; http://php.net/define-syslog-variables 
define_syslog_variables = Off 
[mail function] 
; For Win32 only. 
; http://php.net/smtp 
SMTP = localhost 
; http://php.net/smtp-port 
smtp_port = 25 
; For Win32 only. 
; http://php.net/sendmail-from 
;sendmail_from = [email protected] 
; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). 
; http://php.net/sendmail-path 
;sendmail_path = 
; Force the addition of the specified parameters to be passed as extra parameters 
; to the sendmail binary. These parameters will always replace the value of 
; the 5th parameter to mail(), even in safe mode. 
;mail.force_extra_parameters = 
; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename 
mail.add_x_header = On 
; The path to a log file that will log all mail() calls. Log entries include 
; the full path of the script, line number, To address and headers. 
;mail.log = 
[SQL] 
; http://php.net/sql.safe-mode 
sql.safe_mode = Off 
[ODBC] 
; http://php.net/odbc.default-db 
;odbc.default_db = Not yet implemented 
; http://php.net/odbc.default-user 
;odbc.default_user = Not yet implemented 
; http://php.net/odbc.default-pw 
;odbc.default_pw = Not yet implemented 
; Controls the ODBC cursor model. 
; Default: SQL_CURSOR_STATIC (default). 
;odbc.default_cursortype 
; Allow or prevent persistent links. 
; http://php.net/odbc.allow-persistent 
odbc.allow_persistent = On 
; Check that a connection is still valid before reuse. 
; http://php.net/odbc.check-persistent 
odbc.check_persistent = On 
; Maximum number of persistent links. -1 means no limit. 
; http://php.net/odbc.max-persistent 
odbc.max_persistent = -1 
; Maximum number of links (persistent + non-persistent). -1 means no limit. 
; http://php.net/odbc.max-links 
odbc.max_links = -1 
; Handling of LONG fields. Returns number of bytes to variables. 0 means 
; passthru. 
; http://php.net/odbc.defaultlrl 
odbc.defaultlrl = 4096 
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. 
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation 
; of odbc.defaultlrl and odbc.defaultbinmode 
; http://php.net/odbc.defaultbinmode 
odbc.defaultbinmode = 1 
;birdstep.max_links = -1 
[Interbase] 
; Allow or prevent persistent links. 
ibase.allow_persistent = 1 
; Maximum number of persistent links. -1 means no limit. 
ibase.max_persistent = -1 
; Maximum number of links (persistent + non-persistent). -1 means no limit. 
ibase.max_links = -1 
; Default database name for ibase_connect(). 
;ibase.default_db = 
; Default username for ibase_connect(). 
;ibase.default_user = 
; Default password for ibase_connect(). 
;ibase.default_password = 
; Default charset for ibase_connect(). 
;ibase.default_charset = 
; Default timestamp format. 
ibase.timestampformat = "%Y-%m-%d %H:%M:%S" 
; Default date format. 
ibase.dateformat = "%Y-%m-%d" 
; Default time format. 
ibase.timeformat = "%H:%M:%S" 
[MySQL] 
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements 
; http://php.net/mysql.allow_local_infile 
mysql.allow_local_infile = On 
; Allow or prevent persistent links. 
; http://php.net/mysql.allow-persistent 
mysql.allow_persistent = On 
; If mysqlnd is used: Number of cache slots for the internal result set cache 
; http://php.net/mysql.cache_size 
mysql.cache_size = 2000 
; Maximum number of persistent links. -1 means no limit. 
; http://php.net/mysql.max-persistent 
mysql.max_persistent = -1 
; Maximum number of links (persistent + non-persistent). -1 means no limit. 
; http://php.net/mysql.max-links 
mysql.max_links = -1 
; Default port number for mysql_connect(). If unset, mysql_connect() will use 
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the 
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look 
; at MYSQL_PORT. 
; http://php.net/mysql.default-port 
mysql.default_port = 
; Default socket name for local MySQL connects. If empty, uses the built-in 
; MySQL defaults. 
; http://php.net/mysql.default-socket 
mysql.default_socket = 
; Default host for mysql_connect() (doesn't apply in safe mode). 
; http://php.net/mysql.default-host 
mysql.default_host = 
; Default user for mysql_connect() (doesn't apply in safe mode). 
; http://php.net/mysql.default-user 
mysql.default_user = 
; Default password for mysql_connect() (doesn't apply in safe mode). 
; Note that this is generally a *bad* idea to store passwords in this file. 
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") 
; and reveal this password! And of course, any users with read access to this 
; file will be able to reveal the password as well. 
; http://php.net/mysql.default-password 
mysql.default_password = 
; Maximum time (in seconds) for connect timeout. -1 means no limit 
; http://php.net/mysql.connect-timeout 
mysql.connect_timeout = 60 
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and 
; SQL-Errors will be displayed. 
; http://php.net/mysql.trace-mode 
mysql.trace_mode = Off 
[MySQLi] 
; Maximum number of persistent links. -1 means no limit. 
; http://php.net/mysqli.max-persistent 
mysqli.max_persistent = -1 
; Maximum number of links. -1 means no limit. 
; http://php.net/mysqli.max-links 
mysqli.max_links = -1 
; If mysqlnd is used: Number of cache slots for the internal result set cache 
; http://php.net/mysqli.cache_size 
mysqli.cache_size = 2000 
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use 
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the 
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look 
; at MYSQL_PORT. 
; http://php.net/mysqli.default-port 
mysqli.default_port = 3306 
; Default socket name for local MySQL connects. If empty, uses the built-in 
; MySQL defaults. 
; http://php.net/mysqli.default-socket 
mysqli.default_socket = 
; Default host for mysql_connect() (doesn't apply in safe mode). 
; http://php.net/mysqli.default-host 
mysqli.default_host = 
; Default user for mysql_connect() (doesn't apply in safe mode). 
; http://php.net/mysqli.default-user 
mysqli.default_user = 
; Default password for mysqli_connect() (doesn't apply in safe mode). 
; Note that this is generally a *bad* idea to store passwords in this file. 
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") 
; and reveal this password! And of course, any users with read access to this 
; file will be able to reveal the password as well. 
; http://php.net/mysqli.default-pw 
mysqli.default_pw = 
; Allow or prevent reconnect 
mysqli.reconnect = Off 
[mysqlnd] 
; Enable / Disable collection of general statstics by mysqlnd which can be 
; used to tune and monitor MySQL operations. 
; http://php.net/mysqlnd.collect_statistics 
mysqlnd.collect_statistics = On 
; Enable / Disable collection of memory usage statstics by mysqlnd which can be 
; used to tune and monitor MySQL operations. 
; http://php.net/mysqlnd.collect_memory_statistics 
mysqlnd.collect_memory_statistics = On 
; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. 
; http://php.net/mysqlnd.net_cmd_buffer_size 
;mysqlnd.net_cmd_buffer_size = 2048 
; Size of a pre-allocated buffer used for reading data sent by the server in 
; bytes. 
; http://php.net/mysqlnd.net_read_buffer_size 
;mysqlnd.net_read_buffer_size = 32768 
[OCI8] 
; Connection: Enables privileged connections using external 
; credentials (OCI_SYSOPER, OCI_SYSDBA) 
; http://php.net/oci8.privileged-connect 
;oci8.privileged_connect = Off 
; Connection: The maximum number of persistent OCI8 connections per 
; process. Using -1 means no limit. 
; http://php.net/oci8.max-persistent 
;oci8.max_persistent = -1 
; Connection: The maximum number of seconds a process is allowed to 
; maintain an idle persistent connection. Using -1 means idle 
; persistent connections will be maintained forever. 
; http://php.net/oci8.persistent-timeout 
;oci8.persistent_timeout = -1 
; Connection: The number of seconds that must pass before issuing a 
; ping during oci_pconnect() to check the connection validity. When 
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables 
; pings completely. 
; http://php.net/oci8.ping-interval 
;oci8.ping_interval = 60 
; Connection: Set this to a user chosen connection class to be used 
; for all pooled server requests with Oracle 11g Database Resident 
; Connection Pooling (DRCP). To use DRCP, this value should be set to 
; the same string for all web servers running the same application, 
; the database pool must be configured, and the connection string must 
; specify to use a pooled server. 
;oci8.connection_class = 
; High Availability: Using On lets PHP receive Fast Application 
; Notification (FAN) events generated when a database node fails. The 
; database must also be configured to post FAN events. 
;oci8.events = Off 
; Tuning: This option enables statement caching, and specifies how 
; many statements to cache. Using 0 disables statement caching. 
; http://php.net/oci8.statement-cache-size 
;oci8.statement_cache_size = 20 
; Tuning: Enables statement prefetching and sets the default number of 
; rows that will be fetched automatically after statement execution. 
; http://php.net/oci8.default-prefetch 
;oci8.default_prefetch = 100 
; Compatibility. Using On means oci_close() will not close 
; oci_connect() and oci_new_connect() connections. 
; http://php.net/oci8.old-oci-close-semantics 
;oci8.old_oci_close_semantics = Off 
[PostgresSQL] 
; Allow or prevent persistent links. 
; http://php.net/pgsql.allow-persistent 
pgsql.allow_persistent = On 
; Detect broken persistent links always with pg_pconnect(). 
; Auto reset feature requires a little overheads. 
; http://php.net/pgsql.auto-reset-persistent 
pgsql.auto_reset_persistent = Off 
; Maximum number of persistent links. -1 means no limit. 
; http://php.net/pgsql.max-persistent 
pgsql.max_persistent = -1 
; Maximum number of links (persistent+non persistent). -1 means no limit. 
; http://php.net/pgsql.max-links 
pgsql.max_links = -1 
; Ignore PostgreSQL backends Notice message or not. 
; Notice message logging require a little overheads. 
; http://php.net/pgsql.ignore-notice 
pgsql.ignore_notice = 0 
; Log PostgreSQL backends Notice message or not. 
; Unless pgsql.ignore_notice=0, module cannot log notice message. 
; http://php.net/pgsql.log-notice 
pgsql.log_notice = 0 
[Sybase-CT] 
; Allow or prevent persistent links. 
; http://php.net/sybct.allow-persistent 
sybct.allow_persistent = On 
; Maximum number of persistent links. -1 means no limit. 
; http://php.net/sybct.max-persistent 
sybct.max_persistent = -1 
; Maximum number of links (persistent + non-persistent). -1 means no limit. 
; http://php.net/sybct.max-links 
sybct.max_links = -1 
; Minimum server message severity to display. 
; http://php.net/sybct.min-server-severity 
sybct.min_server_severity = 10 
; Minimum client message severity to display. 
; http://php.net/sybct.min-client-severity 
sybct.min_client_severity = 10 
; Set per-context timeout 
; http://php.net/sybct.timeout 
;sybct.timeout= 
;sybct.packet_size 
; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. 
; Default: one minute 
;sybct.login_timeout= 
; The name of the host you claim to be connecting from, for display by sp_who. 
; Default: none 
;sybct.hostname= 
; Allows you to define how often deadlocks are to be retried. -1 means "forever". 
; Default: 0 
;sybct.deadlock_retry_count= 
[bcmath] 
; Number of decimal digits for all bcmath functions. 
; http://php.net/bcmath.scale 
bcmath.scale = 0 
[browscap] 
; http://php.net/browscap 
;browscap = extra/browscap.ini 
[Session] 
; Handler used to store/retrieve data. 
; http://php.net/session.save-handler 
session.save_handler = files 
; Argument passed to save_handler. In the case of files, this is the path 
; where data files are stored. Note: Windows users have to change this 
; variable in order to use PHP's session functions. 

; The path can be defined as: 

; session.save_path = "N;/path" 

; where N is an integer. Instead of storing all the session files in 
; /path, what this will do is use subdirectories N-levels deep, and 
; store the session data in those directories. This is useful if you 
; or your OS have problems with lots of files in one directory, and is 
; a more efficient layout for servers that handle lots of sessions. 

; NOTE 1: PHP will not create this directory structure automatically. 
; You can use the script in the ext/session dir for that purpose. 
; NOTE 2: See the section on garbage collection below if you choose to 
; use subdirectories for session storage 

; The file storage module creates files using mode 600 by default. 
; You can change that by using 

; session.save_path = "N;MODE;/path" 

; where MODE is the octal representation of the mode. Note that this 
; does not overwrite the process's umask. 
; http://php.net/session.save-path 
;session.save_path = "/tmp" 
; Whether to use cookies. 
; http://php.net/session.use-cookies 
session.use_cookies = 1 
; http://php.net/session.cookie-secure 
;session.cookie_secure = 
; This option forces PHP to fetch and use a cookie for storing and maintaining 
; the session id. We encourage this operation as it's very helpful in combatting 
; session hijacking when not specifying and managing your own session id. It is 
; not the end all be all of session hijacking defense, but it's a good start. 
; http://php.net/session.use-only-cookies 
session.use_only_cookies = 1 
; Name of the session (used as cookie name). 
; http://php.net/session.name 
session.name = PHPSESSID 
; Initialize session on request startup. 
; http://php.net/session.auto-start 
session.auto_start = 0 
; Lifetime in seconds of cookie or, if 0, until browser is restarted. 
; http://php.net/session.cookie-lifetime 
session.cookie_lifetime = 0 
; The path for which the cookie is valid. 
; http://php.net/session.cookie-path 
session.cookie_path = / 
; The domain for which the cookie is valid. 
; http://php.net/session.cookie-domain 
session.cookie_domain = 
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. 
; http://php.net/session.cookie-httponly 
session.cookie_httponly = 
; Handler used to serialize data. php is the standard serializer of PHP. 
; http://php.net/session.serialize-handler 
session.serialize_handler = php 
; Defines the probability that the 'garbage collection' process is started 
; on every session initialization. The probability is calculated by using 
; gc_probability/gc_divisor. Where session.gc_probability is the numerator 
; and gc_divisor is the denominator in the equation. Setting this value to 1 
; when the session.gc_divisor value is 100 will give you approximately a 1% chance 
; the gc will run on any give request. 
; Default Value: 1 
; Development Value: 1 
; Production Value: 1 
; http://php.net/session.gc-probability 
session.gc_probability = 1 
; Defines the probability that the 'garbage collection' process is started on every 
; session initialization. The probability is calculated by using the following equation: 
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and 
; session.gc_divisor is the denominator in the equation. Setting this value to 1 
; when the session.gc_divisor value is 100 will give you approximately a 1% chance 
; the gc will run on any give request. Increasing this value to 1000 will give you 
; a 0.1% chance the gc will run on any give request. For high volume production servers, 
; this is a more efficient approach. 
; Default Value: 100 
; Development Value: 1000 
; Production Value: 1000 
; http://php.net/session.gc-divisor 
session.gc_divisor = 1000 
; After this number of seconds, stored data will be seen as 'garbage' and 
; cleaned up by the garbage collection process. 
; http://php.net/session.gc-maxlifetime 
session.gc_maxlifetime = 1440 
; NOTE: If you are using the subdirectory option for storing session files 
; (see session.save_path above), then garbage collection does *not* 
; happen automatically. You will need to do your own garbage 
; collection through a shell script, cron entry, or some other method. 
; For example, the following script would is the equivalent of 
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): 
; find /path/to/sessions -cmin +24 | xargs rm 
; PHP 4.2 and less have an undocumented feature/bug that allows you to 
; to initialize a session variable in the global scope, even when register_globals 
; is disabled. PHP 4.3 and later will warn you, if this feature is used. 
; You can disable the feature and the warning separately. At this time, 
; the warning is only displayed, if bug_compat_42 is enabled. This feature 
; introduces some serious security problems if not handled correctly. It's 
; recommended that you do not use this feature on production servers. But you 
; should enable this on development servers and enable the warning as well. If you 
; do not enable the feature on development servers, you won't be warned when it's 
; used and debugging errors caused by this can be difficult to track down. 
; Default Value: On 
; Development Value: On 
; Production Value: Off 
; http://php.net/session.bug-compat-42 
session.bug_compat_42 = On 
; This setting controls whether or not you are warned by PHP when initializing a 
; session value into the global space. session.bug_compat_42 must be enabled before 
; these warnings can be issued by PHP. See the directive above for more information. 
; Default Value: On 
; Development Value: On 
; Production Value: Off 
; http://php.net/session.bug-compat-warn 
session.bug_compat_warn = On 
; Check HTTP Referer to invalidate externally stored URLs containing ids. 
; HTTP_REFERER has to contain this substring for the session to be 
; considered as valid. 
; http://php.net/session.referer-check 
session.referer_check = 
; How many bytes to read from the file. 
; http://php.net/session.entropy-length 
session.entropy_length = 0 
; Specified here to create the session id. 
; http://php.net/session.entropy-file 
; On systems that don't have /dev/urandom /dev/arandom can be used 
; On windows, setting the entropy_length setting will activate the 
; Windows random source (using the CryptoAPI) 
;session.entropy_file = /dev/urandom 
session.entropy_file = 
; Set to {nocache,private,public,} to determine HTTP caching aspects 
; or leave this empty to avoid sending anti-caching headers. 
; http://php.net/session.cache-limiter 
session.cache_limiter = nocache 
; Document expires after n minutes. 
; http://php.net/session.cache-expire 
session.cache_expire = 180 
; trans sid support is disabled by default. 
; Use of trans sid may risk your users security. 
; Use this option with caution. 
; - User may send URL contains active session ID 
; to other person via. email/irc/etc. 
; - URL that contains active session ID may be stored 
; in publically accessible computer. 
; - User may access your site with the same session ID 
; always using URL stored in browser's history or bookmarks. 
; http://php.net/session.use-trans-sid 
session.use_trans_sid = 0 
; Select a hash function for use in generating session ids. 
; Possible Values 
; 0 (MD5 128 bits) 
; 1 (SHA-1 160 bits) 
; This option may also be set to the name of any hash function supported by 
; the hash extension. A list of available hashes is returned by the hash_algos() 
; function. 
; http://php.net/session.hash-function 
session.hash_function = 0 
; Define how many bits are stored in each character when converting 
; the binary hash data to something readable. 
; Possible values: 
; 4 (4 bits: 0-9, a-f) 
; 5 (5 bits: 0-9, a-v) 
; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") 
; Default Value: 4 
; Development Value: 5 
; Production Value: 5 
; http://php.net/session.hash-bits-per-character 
session.hash_bits_per_character = 5 
; The URL rewriter will look for URLs in a defined set of HTML tags. 
; form/fieldset are special; if you include them here, the rewriter will 
; add a hidden <input> field with the info which is otherwise appended 
; to URLs. If you want XHTML conformity, remove the form entry. 
; Note that all valid entries require a "=", even if no value follows. 
; Default Value: "a=href,area=href,frame=src,form=,fieldset=" 
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 
; http://php.net/url-rewriter.tags 
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" 
[MSSQL] 
; Allow or prevent persistent links. 
mssql.allow_persistent = On 
; Maximum number of persistent links. -1 means no limit. 
mssql.max_persistent = -1 
; Maximum number of links (persistent+non persistent). -1 means no limit. 
mssql.max_links = -1 
; Minimum error severity to display. 
mssql.min_error_severity = 10 
; Minimum message severity to display. 
mssql.min_message_severity = 10 
; Compatibility mode with old versions of PHP 3.0. 
mssql.compatability_mode = Off 
; Connect timeout 
;mssql.connect_timeout = 5 
; Query timeout 
;mssql.timeout = 60 
; Valid range 0 - 2147483647. Default = 4096. 
;mssql.textlimit = 4096 
; Valid range 0 - 2147483647. Default = 4096. 
;mssql.textsize = 4096 
; Limits the number of records in each batch. 0 = all records in one batch. 
;mssql.batchsize = 0 
; Specify how datetime and datetim4 columns are returned 
; On => Returns data converted to SQL server settings 
; Off => Returns values as YYYY-MM-DD hh:mm:ss 
;mssql.datetimeconvert = On 
; Use NT authentication when connecting to the server 
mssql.secure_connection = Off 
; Specify max number of processes. -1 = library default 
; msdlib defaults to 25 
; FreeTDS defaults to 4096 
;mssql.max_procs = -1 
; Specify client character set. 
; If empty or not set the client charset from freetds.comf is used 
; This is only used when compiled with FreeTDS 
;mssql.charset = "ISO-8859-1" 
[Assertion] 
; Assert(expr); active by default. 
; http://php.net/assert.active 
;assert.active = On 
; Issue a PHP warning for each failed assertion. 
; http://php.net/assert.warning 
;assert.warning = On 
; Don't bail out by default. 
; http://php.net/assert.bail 
;assert.bail = Off 
; User-function to be called if an assertion fails. 
; http://php.net/assert.callback 
;assert.callback = 0 
; Eval the expression with current error_reporting(). Set to true if you want 
; error_reporting(0) around the eval(). 
; http://php.net/assert.quiet-eval 
;assert.quiet_eval = 0 
[COM] 
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs 
; http://php.net/com.typelib-file 
;com.typelib_file = 
; allow Distributed-COM calls 
; http://php.net/com.allow-dcom 
;com.allow_dcom = true 
; autoregister constants of a components typlib on com_load() 
; http://php.net/com.autoregister-typelib 
;com.autoregister_typelib = true 
; register constants casesensitive 
; http://php.net/com.autoregister-casesensitive 
;com.autoregister_casesensitive = false 
; show warnings on duplicate constant registrations 
; http://php.net/com.autoregister-verbose 
;com.autoregister_verbose = true 
; The default character set code-page to use when passing strings to and from COM objects. 
; Default: system ANSI code page 
;com.code_page= 
[mbstring] 
; language for internal character representation. 
; http://php.net/mbstring.language 
;mbstring.language = Japanese 
; internal/script encoding. 
; Some encoding cannot work as internal encoding. 
; (e.g. SJIS, BIG5, ISO-2022-*) 
; http://php.net/mbstring.internal-encoding 
;mbstring.internal_encoding = EUC-JP 
; http input encoding. 
; http://php.net/mbstring.http-input 
;mbstring.http_input = auto 
; http output encoding. mb_output_handler must be 
; registered as output buffer to function 
; http://php.net/mbstring.http-output 
;mbstring.http_output = SJIS 
; enable automatic encoding translation according to 
; mbstring.internal_encoding setting. Input chars are 
; converted to internal encoding by setting this to On. 
; Note: Do _not_ use automatic encoding translation for 
; portable libs/applications. 
; http://php.net/mbstring.encoding-translation 
;mbstring.encoding_translation = Off 
; automatic encoding detection order. 
; auto means 
; http://php.net/mbstring.detect-order 
;mbstring.detect_order = auto 
; substitute_character used when character cannot be converted 
; one from another 
; http://php.net/mbstring.substitute-character 
;mbstring.substitute_character = none; 
; overload(replace) single byte functions by mbstring functions. 
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), 
; etc. Possible values are 0,1,2,4 or combination of them. 
; For example, 7 for overload everything. 
; 0: No overload 
; 1: Overload mail() function 
; 2: Overload str*() functions 
; 4: Overload ereg*() functions 
; http://php.net/mbstring.func-overload 
;mbstring.func_overload = 0 
; enable strict encoding detection. 
;mbstring.strict_detection = Off 
; This directive specifies the regex pattern of content types for which mb_output_handler() 
; is activated. 
; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) 
;mbstring.http_output_conv_mimetype= 
; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte 
; Default: "" 
;mbstring.script_encoding= 
[gd] 
; Tell the jpeg decode to ignore warnings and try to create 
; a gd image. The warning will then be displayed as notices 
; disabled by default 
; http://php.net/gd.jpeg-ignore-warning 
;gd.jpeg_ignore_warning = 0 
[exif] 
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. 
; With mbstring support this will automatically be converted into the encoding 
; given by corresponding encode setting. When empty mbstring.internal_encoding 
; is used. For the decode settings you can distinguish between motorola and 
; intel byte order. A decode setting cannot be empty. 
; http://php.net/exif.encode-unicode 
;exif.encode_unicode = ISO-8859-15 
; http://php.net/exif.decode-unicode-motorola 
;exif.decode_unicode_motorola = UCS-2BE 
; http://php.net/exif.decode-unicode-intel 
;exif.decode_unicode_intel = UCS-2LE 
; http://php.net/exif.encode-jis 
;exif.encode_jis = 
; http://php.net/exif.decode-jis-motorola 
;exif.decode_jis_motorola = JIS 
; http://php.net/exif.decode-jis-intel 
;exif.decode_jis_intel = JIS 
[Tidy] 
; The path to a default tidy configuration file to use when using tidy 
; http://php.net/tidy.default-config 
;tidy.default_config = /usr/local/lib/php/default.tcfg 
; Should tidy clean and repair output automatically? 
; WARNING: Do not use this option if you are generating non-html content 
; such as dynamic images 
; http://php.net/tidy.clean-output 
tidy.clean_output = Off 
[soap] 
; Enables or disables WSDL caching feature. 
; http://php.net/soap.wsdl-cache-enabled 
soap.wsdl_cache_enabled=1 
; Sets the directory name where SOAP extension will put cache files. 
; http://php.net/soap.wsdl-cache-dir 
soap.wsdl_cache_dir="/tmp" 
; (time to live) Sets the number of second while cached file will be used 
; instead of original one. 
; http://php.net/soap.wsdl-cache-ttl 
soap.wsdl_cache_ttl=86400 
; Sets the size of the cache limit. (Max. number of WSDL files to cache) 
soap.wsdl_cache_limit = 5 
[sysvshm] 
; A default size of the shared memory segment 
;sysvshm.init_mem = 10000 
[ldap] 
; Sets the maximum number of open links or -1 for unlimited. 
ldap.max_links = -1 
[mcrypt] 
; For more information about mcrypt settings see http://php.net/mcrypt-module-open 
; Directory where to load mcrypt algorithms 
; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) 
;mcrypt.algorithms_dir= 
; Directory where to load mcrypt modes 
; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) 
;mcrypt.modes_dir= 
[dba] 
;dba.default_handler= 
; Local Variables: 
; tab-width: 4 
; End: